 |
|
 |
|
 |
| |
|
|
 |
|
| |
DISTRIBUTORS,
DOSING VALVES, CONNECTIONS |
 |
| |
|
|
 |
|
|
Resistive dosing valves
for low pressure 0,75-1-2-4-8-16
drops per minute
2-3-4-5-6 ways line distibutors/dividers
3 ways line divider
Volumetric dosing valves
for medium pressure
0,03-0,05-0,07-0,10-0,15-0,20-0,25-0,30
cm3
Straight terminal connection
M 3x0,5 M 6x1,0 M 8x1,0 M 10x1,0
and 1/8”G
90° terminal connection
M 3x0,5 M 6x1,0 M 8x1,0 M 10x1,0
and 1/8”G.
|
|
distributori |
|
|
| |
|
|
 |
|
Distributors
DRE Series
|
Distributor
obtained from coaxial perforated
extruded
aluminium bars.
Each model has the line inlet
and outlet at the ends and
two holes for fixing to a wall.
They are available with from
2 to 6 radial ways with a pitch
of 14 mm.
The identification code refers
to the number of radial ways
excluding the inlet and outlet.
|
 |
|
Distributors
DRT Series
|
Distributor
obtained from drawn aluminium
bars.
Each model has the line inlet
and outlet at the ends and
two holes for fixing to a wall.
They are available with from
2 to 6 radial ways with a pitch
of 19 mm.
The identification code refers
to the number of radial ways
excluding the inlet and outlet.
|
|
|
dosatori |
|
|
| |
|
|
 |
|
Resistive
Dosing Valves
|
The
resistive dosing valve,
under low pressure, has
its flow
rate determined in drops per
minute, the volume of a drop
corresponds to 33 mm3, the
quantity of drops is defined
as
the relative flow rate. The
range of relative flow rates
is
given in the table.
The relative flow rate is determined
with the following
parameters:
oil with a viscosity of 65,5
cSt at 40°C, test temperature
20°C, mean test pressure
2,7 bar. Modifying even just
one
of these parameters varies
the relative flow rate.
|
 |
|
Volumetric
Dosing Valves
Z Series
|
The “Z
Series” fixed flow-rate
volumetric dosing valve
is
characterized by the fact that
at the lubricant inlet there
is a special valve, patented
for Italy, USA, Germany, Mexico,
Canada and Saudi Arabia, and
in the general construction
context it is distinguished
by having a double seal in
the
two phases of Work and Pause.
It can thus be defined a medium
pressure fixed flow-rate
“Double Seal Volumetric
Dosing valve.”
|
 |
|
Volumetric
Dosing Valves
L Series
|
The “L
Series” fixed flow-rate
volumetric dosing valve
differs
from the “Z Series” volumetric
dosing valve in its
compactness, reduced sized,
direct locking of the pipe
Ø4 for the service.
Like the “Z Series,” it
is characterized
by the fact that at the lubricant
inlet there is a special
valve, patented for Italy,
USA, Germany, Mexico, Canada
and Saudi Arabia, and in the
general construction context
it is distinguished by having
a double seal in the two phases
of Work and Pause.
|
|
|
raccordi |
|
|
| |
|
|
 |
|
|
|
 |
|
|
|
 |
|
|
|
 |
|
Mini-Block
Terminal Connections
|
|
|
|
accessori |
|
|
| |
|
|
 |
|
|
The
FL BP.81 filter is composed
of a body and an aluminium
cap, screwed together and a
wall bracket. On the inside
there is a star cartridge with
a seal and paper filtering
element, with filtration 10-30
mm.
The FL BP.81 model is not fitted
with a one-way check valve
as all our low pressure pumps
are equipped with this type
of valve, it must not be installed
in systems with pumps with
a line pressure release valve.
|
|
|
|
The
FL MPBY.18 filter is composed
of a top body with a
By-pass valve on the outlet
duct and an aluminium cap,
screwed together. Wall fastening
with bracket.
On the inside there is a star
cartridge with a seal and paper
filtering element, with filtration
10-30 mm.
In the top cap there is a By-pass
valve on the outlet/service
duct with two opposing one-way
check valves to prevent
oil returning into the cartridge
and particles of dirt separating
from the filtering surface
in the phase of decompression
of
the main line for recharging
volumetric dosing valves.
|
 |
|
Accessories.
Rubber hoses joint
at the two ends.
Sae 100 r7 nylon hoses.
Neutral rilsan pipes.
Stop bushings.
Stop nuts.
|
|
|
|
| |
|
|
|
|
|
| |
|
AZETA ZEO ASIOLI DIFFUSION SRL |
|
|
|
Via Bellelli, 2 - 42015 CORREGGIO (RE) - Italy - Tel. e Fax +39 0522 690156 |
|
|
|
|
|
|
|
|
